• About SSMB Series

The SSMB 50 Ohm connector is a small version of the standard SMB connector. While the snap-on mating interface allows quick installation and dense packaging, the excellent electrical performance of the SSMB series allows it to be used in many applications as an alternative to larger connectors like SMAs.
The SSMB is suitable for the standard ranges of flexible and semi rigid cables and is also available in PCB and panel mount versions.

Impedance：50Ω
Frequency Range：0 to 3 GHz
Voltage Rating：≥175 V rms (depending on cable)
Insulation Resistance：≥1 GΩ
Dielectric Withstanding Voltage：500 V rms
Contact Resistance：Center Contact ≤5 mΩ、Outer Contact ≤2.5 mΩ
VSWR：≤1.35

Mating： Snap-on Coupling
Connector Durability： ≥500 Cycles (for beryllium copper female contact only)
Engagement Force：6.0 lbs
Disengagement Force：1.8 lbs ~ 6.0 lbs
Cable Retention Force：≥ 7.3 lbs (for RG178)、≥ 12.1 lbs (for RG316)

Temperature Range：-55° C to 155° C
Corrosion (Salt Spray)：MIL-STD-202, Method 101, Cond. B
Thermal Shock：MIL-STD-202, Method 107, Cond. B
Mechanical：MIL-STD-202, Method 213, Cond. B
Vibration：MIL-STD-202, Method 204, Cond. D

Parts Name Material Plating
Body Brass Nickel or Gold
Inner Contact Plug: Brass
Jack:Phosphor Bronz Beryllium Copper		 Gold
Insulator PTFE None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

  • Frequency range up to 3 GHz
  • VSWR (straight connector) : ＜ 1.30 typ.
  • Interface according to IEC 169-19, MIL-STD-348B
  • Cable Connectors (straight and right angle) for flexible cables with diameters from 2 to 2.8 mm
  • PCB connectors (straight and right angle)
  • Panel connectors
View All Products