• About F Series

F connectors were designed as a low cost method of coupling coaxial cables and equipment used in TV, MTV, and satellite communication applications. They have threaded coupling interfaces and the plug utilizes the center contacts of the cable rather than a separately applied pin. They are designed for low frequency transmissions (typically video) up to 2GHz.

Impedance：75Ω
Frequency Range：0 to 1 GHz
Voltage Rating：≥500 V rms (depending on cable)
Insulation Resistance：≥5 GΩ
Dielectric Withstanding Voltage：1500 V rms
Contact Resistance：Center Contact  ≤10 mΩ、Outer Contact ≤1 mΩ
VSWR：≤1.2

Mating：3/8-32 UNEF Screw-on
Connector Durability：≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque：0.38 lbs ~ 0.51 lbs
Coupling Nut Retention Force：1.5 lbs
Cable Retention Force：≥20 lbs

Temperature Range：-40° C to 60° C
Corrosion (Salt Spray)：IEC61169-1,Sub clause9.4.6
Thermal Shock：IEC61169-1,Sub clause9.4.4
Mechanical：IEC61169-1,Sub clause9.3.14
Vibration：IEC61169-1,Sub clause9.4.4

Parts NameMaterialPlating
BodyBrassNickel
Inner ContactPlug: Brass
Jack:Brass, Beryllium Copper or Phosphor Bronze		Tin or Gold
FerruleBrassNickel
InsulatorDelrin, Polypropylene, PTFE 
NutSilicone Rubber, RubberNickel
WasherAnnealed CopperNickel

Note: Other Material/Finish is Available on Request.

  • Interface according to IEC 169-24
  • Satellite Boxes
  • Set Top Boxes
  • CATV Networks
View All Products