The C-SX-126 is a bulkhead mounting BNC connector which can be used in PCI® Express applications. It features a pathfinderTM light pipe which aids port identification and status. The C-SX-126 has a centre line of 7mm, which is taller than other connectors in this range. It also has a built in flange which provides additional EMI shielding and is optimised for 6G HD-SDI environments. The connector is not supplied with nut and washer.
Related products
The C-SX-105 precision 75Ω BNC Connector is a right angle mounted PCB connector. It also features PathfinderTM light pipe technology with the viewport located in the top of the connector to allow for port identification even when the connector is mated. The connector is supplied with nut and washer.
The C-SX-131 is a PCB edge mounted BNC Connector which meets the SMPTE 424M standard, allowing bit-rates of 2.970Gbit/s over a single coaxial connection. The PCB edge mounting style minimises signal path discontinuities while the location webs ensure an accurate position is obtained in PCB production.
The C-SX-100 precision 75Ω BNC Connector is a top entry four pin PCB mounted connector. Cambridge Connectors precision BNC range are compatible with all other standard BNC connectors, but peak performance is achieved when mated with other connectors in our range.
This precision 75Ω BNC Connector is a right angle mounted PCB connector for surface mount applications. It also features PathfinderTM light pipe technology which aids port identification. With a centre line of 4mm above the board, its low profile permits closer packing densities of daughter boards, which allows reduction in the bulk of routing and
The C-SX-114 precision 75Ω BNC Connector is a right angle mounted PCB connector . It also features PathfinderTM light pipe technology with the viewport located in the bottom of the connector, to aid port identification even when mated. The connector is supplied with nut and washer.
The C-SX-156 is a bulkhead mounting BNC connector which can be used in PCI® Express applications. It features a pathfinderTM light pipe which aids port identification and status. The connector has a shorter leg length of 2.2mm. It also has a built in flange which provides additional EMI shielding and is optimised for 6G HD-SDI
The C-SX-164 Precision 75Ω BNC top entry PCB mounted bulkhead connector with a seal at the base. The connector meets SMPTE ST-2081 allowing 6Gbits/s over a single channel. Each connector is supplied with a nut and washer.
Our range of 12GHz Precision BNC coaxial connectors are optimised for 4K/Quad HD and Ultra HD Broadcast applications and have been developed under the CoaxVisionTM Brand name, while meeting the JIIA CoaXPress specification. These high performance connectors allow you to achieve a 12GHz channel in one single connection. The BNC connectors are mateable with any standard