The C-SX-113GN is a right angle PCB bulkhead mounted connector which conforms to the standard of SMPTE ST 2081-1, allowing bit-rates of 5.94Gbit/s over a single coaxial connection. The 8mm pitch and low profile of the connector enables double wiring densities and is optimised for use in 6G HD-SDI applications. The C-SX-113GN is supplied with a 2.35mm deep M5 nut.
Related products
The C-SX-167G precision 75Ω 1.0/2.3 dual port right angle PCB mounted Connector is designed for Multi Layer PCB applications which require a longer leg length of 4.2mm. The connector is supplied with nuts.
The C-SX-179 is a top entry PCB bulkhead mounted connector which conforms to the standard of SMPTE ST 2081-1, allowing bit-rates of 5.94Gbit/s over a single coaxial connection. The 8mm pitch and low profile of the connector enables double wiring densities and is optimised for use in 6G HD-SDI applications. The connector is supplied with
The C-SX-161 precision 75Ω DIN 1.0/2.3 Stacking Bulkhead Connector. The small format of the 1.0/2.3 style connector and the diagonal mounting format allows an enhanced packing density of connections on a standard PCI card. The connector is supplied with nut.
The C-SX-171G precision 75Ω 1.0/2.3 dual port right angle PCB mounted Connector is designed for Multi Layer PCB applications which require a shorter leg length of 2.4mm. The connector is not supplied with nuts.
The C-SX-121, is the tape and reel placement part number for the C-SX-86G precision 75Ω DIN 1.0/2.3 Connector is right angled mounted PCB bulkhead connector. This range of connectors meets the SMPTE 424M standard and is ideal for use in industrial process control and data acquisition applications. The connector is mounted in a tape carrier
The C-SX-099G precision 75Ω 1.0/2.3 Connector is a top entry PCB mounted bulkhead connector. This range of connectors meets the SMPTE 424M standard and is ideal for use in industrial process control and data acquisition applications. The connector is supplied with a nut.
The C-SX-135 precision 75Ω 1.0/2.3 Connector is a right angle PCB mounted bulkhead connector. This range of connectors meets the SMPTE ST-2081standard and is ideal for use in industrial process control and data acquisition applications. The connector is supplied with nut.
The C-SX-181G precision 75Ω 1.0/2.3 dual port right angle PCB mounted Connector is designed for Multi Layer PCB applications which require a leg length of 3.2mm. The connector is supplied with nuts.