The C-SX-095 precision 75Ω BNC Connector is a right angle mounted PCB connector with a selection of different leg lengths available. It also features PathfinderTM light pipe technology which is located on the bottom of the connector. With a centre line of 4mm above the board, its low profile permits closer packing densities of daughter boards, which allows reduction in the bulk of routing and switching equipment.
This is not supplied with nuts or washers.
The C-SX-100 precision 75Ω BNC Connector is a top entry four pin PCB mounted connector. Cambridge Connectors precision BNC range are compatible with all other standard BNC connectors, but peak performance is achieved when mated with other connectors in our range.
The C-SX-126 is a bulkhead mounting BNC connector which can be used in PCI® Express applications. It features a pathfinderTM light pipe which aids port identification and status. The C-SX-126 has a centre line of 7mm, which is taller than other connectors in this range. It also has a built in flange which provides additional
The C-SX-156 is a bulkhead mounting BNC connector which can be used in PCI® Express applications. It features a pathfinderTM light pipe which aids port identification and status. The connector has a shorter leg length of 2.2mm. It also has a built in flange which provides additional EMI shielding and is optimised for 6G HD-SDI
The C-SX-123 is a square based, top entry, mounting BNC connector with a long body (17.5mm high), which meets the SMPTE 424M standard, allowing bit-rates of 2.970Gbit/s over a single coaxial connection. This connector is ideal for use in industrial process control and data acquisition applications.
This precision 75Ω BNC Connector is a right angle mounted PCB connector with a selection of different leg lengths available. It also features Pathfinder TM light pipe technology which aids port identification. With a centre line of 4mm above the board, its low profile permits closer packing densities of daughter boards, which allows reduction in the bulk of
The C-SX-111 is a top entry, four pin, bulkhead mounting BNC connector. This BNC connector is suitable for high speed video applications such as 6G HD- SDI digital broadcast and CoaXPress machine vision.
Our range of 12GHz Precision BNC coaxial connectors are optimised for 4K/Quad HD and Ultra HD Broadcast applications and have been developed under the CoaxVisionTM Brand name, while meeting the JIIA CoaXPress specification. These high performance connectors allow you to achieve a 12GHz channel in one single connection. The BNC connectors are mateable with any standard
The C-SX-109 Precision 75Ω BNC Bulkhead is an edge mounting connector with a protective insulator sleeve around the centre contact. This connector is supplied with standard nut and washer. Slotted circular nuts available as an optional extra.
