The C-SX-095 precision 75Ω BNC Connector is a right angle mounted PCB connector with a selection of different leg lengths available. It also features PathfinderTM light pipe technology which is located on the bottom of the connector. With a centre line of 4mm above the board, its low profile permits closer packing densities of daughter boards, which allows reduction in the bulk of routing and switching equipment.
This is not supplied with nuts or washers.
Our range of 12GHz Precision BNC coaxial connectors are optimised for 4K/Quad HD and Ultra HD Broadcast applications and have been developed under the CoaxVisionTM Brand name, while meeting the JIIA CoaXPress specification. These high performance connectors allow you to achieve a 12GHz channel in one single connection. The BNC connectors are mateable with any standard
This precision 75Ω BNC Connector is a right angle mounted PCB connector for surface mount applications. It also features PathfinderTM light pipe technology which aids port identification. With a centre line of 4mm above the board, its low profile permits closer packing densities of daughter boards, which allows reduction in the bulk of routing and
The C-SX-156 is a bulkhead mounting BNC connector which can be used in PCI® Express applications. It features a pathfinderTM light pipe which aids port identification and status. The connector has a shorter leg length of 2.2mm. It also has a built in flange which provides additional EMI shielding and is optimised for 6G HD-SDI
The C-SX-123 is a square based, top entry, mounting BNC connector with a long body (17.5mm high), which meets the SMPTE 424M standard, allowing bit-rates of 2.970Gbit/s over a single coaxial connection. This connector is ideal for use in industrial process control and data acquisition applications.
The C-SX-131 is a PCB edge mounted BNC Connector which meets the SMPTE 424M standard, allowing bit-rates of 2.970Gbit/s over a single coaxial connection. The PCB edge mounting style minimises signal path discontinuities while the location webs ensure an accurate position is obtained in PCB production.
This precision 75Ω BNC Connector is a right angle mounted PCB connector for surface mount applications. It also features PathfinderTM light pipe technology which aids port identification. With a centre line of 4mm above the board, its low profile permits closer packing densities of daughter boards, which allows reduction in the bulk of routing and
The C-SX-145 is a top entry PCB mounted BNC bulkhead connector, which is part of the precision 75Ω range. The connector is optimised for 6G HD—SDI applications and meets the SMPTE ST-2081 standard allowing up to 6Gbit/s per over a single channel. The connector is supplied with circular nut and washer.
The C-SX-106 is a top entry three pin bulkhead mounting BNC connector. This BNC connector is suitable for high speed video applications such as 6G HD- SDI digital broadcast and CoaXPress machine vision.
